this.title = "gg Microsoft"
this.metadata = {
rant: true,
long: true,
super_long: true,
has_summary: true
}
// Also:
let microsoft = "dead" // please?

tl;dr: Windows' MAX_PATH is the devil, and it basically does not allow you to copy files with paths that exceed this length. No matter what. Even with official fixes and workarounds.

Long story:
So, I haven't had actual gainful employ in quite awhile. I've been earning just enough to get behind on bills and go without all but basic groceries. Because of this, our electronics have been ... in need of upgrading for quite awhile. In particular, we've needed new drives. (We've been down a server for two years now because its drive died!)

Anyway, I originally bought my external drive just for backup, but due to the above, I eventually began using it for everyday things. including Steam. over USB. Terrible, right? So, I decided to mount it as an internal drive to lower the read/write times. Finding SATA cables was difficult, the motherboard's SATA plugs are in a terrible spot, and my tiny case (and 2yo) made everything soo much worse. It was a miserable experience, but I finally got it installed.

However! It turns out the Seagate external drives use some custom drive header, or custom driver to access the drive, so Windows couldn't read the bare drive. ffs. So, I took it out again (joy) and put it back in the enclosure, and began copying the files off.

The drive I'm copying it to is smaller, so I enabled compression to allow storing a bit more of the data, and excluded a couple of directories so I could copy those elsewhere. I (barely) managed to fit everything with some pretty tight shuffling.

but. that external drive is connected via USB, remember? and for some reason, even over USB3, I was only getting ~20mb/s transfer rate, so the process took 20some hours! In the interim, I worked on some projects, watched netflix, etc., then locked my computer, and went to bed. (I also made sure to turn my monitors and keyboard light off so it wouldn't be enticing to my 2yo.) Cue dramatic music ~

Come morning, I go to check on the progress... and find that the computer is off! What the hell! I turn it on and check the logs... and found that it lost power around 9:16am. aslkjdfhaslkjashdasfjhasd. My 2yo had apparently been playing with the power strip and its enticing glowing red on/off switch. So. It didn't finish copying.

aslkjdfhaslkjashdasfjhasd x2

Anyway, finding the missing files was easy, but what about any that didn't finish? Filesizes don't match, so writing a script to check doesn't work. and using a visual utility like windirstat won't work either because of the excluded folders. Friggin' hell.

Also -- and rather the point of this rant:

It turns out that some of the files (70 in total, as I eventually found out) have paths exceeding Windows' MAX_PATH length (260 chars). So I couldn't copy those.

After some research, I learned that there's a Microsoft hotfix that patches this specific issue! for my specific version! woo! It's like. totally perfect. So, I installed that, restarted as per its wishes... tried again (via both drag and `copy`)... and Lo! It did not work.

After installing the hotfix. to fix this specific issue. on my specific os. the issue remained. gg Microsoft?

Further research.

I then learned (well, learned more about) the unicode path prefix `\\?\`, which bypasses Windows kernel's path parsing, and passes the path directly to ntfslib, thereby indirectly allowing ~32k path lengths. I tried this with the native `copy` command; no luck. I tried this with `robocopy` and cygwin's `cp`; they likewise failed. I tried it with cygwin's `rsync`, but it sees `\\?\` as denoting a remote path, and therefore fails.

However, `dir \\?\C:\` works just fine?

So, apparently, Microsoft's own workaround for long pathnames doesn't work with its own utilities. unless the paths are shorter than MAX_PATH? gg Microsoft.

At this point, I was sorely tempted to write my own copy utility that calls the internal Windows APIs that support unicode paths. but as I lack a C compiler, and haven't coded in C in like 15 years, I figured I'd try a few last desperate ideas first.

For the hell of it, I tried making an archive of the offending files with winRAR. Unsurprisingly, it failed to access the files.

... and for completeness's sake -- mostly to say I tried it -- I did the same with 7zip. I took one of the offending files and made a 7z archive of it in the destination folder -- and, much to my surprise, it worked perfectly! I could even extract the file! Hell, I could even work with paths >340 characters!

So... I'm going through all of the 70 missing files and copying them. with 7zip. because it's the only bloody thing that works. ffs

Third-party utilities work better than Microsoft's official fixes. gg.

...
On a related note, I totally feel like that person from http://xkcd.com/763 right now ;;